In order to accurately identify the quality of stainless steel chain products, the stainless steel chain factory adopts the method of measurement and inspection. In this process, there are still many details that need to be paid attention to. Whether it is before or during the measurement, it is necessary to do everything possible To reduce errors.

When the stainless steel chain factory measures the stainless steel chain, the stainless steel chain should be cleaned with a soft cloth; then the stainless steel chain to be measured is surrounded by the two sprockets, so that the stainless steel chain can have a better support.

When measuring, a certain weight of load should be placed on the stainless steel chain. This is to make the chain have good tension. The time when the chain is used in the sprocket should ensure that there is a good cooperation of teeth. The center distance between the two sprockets is measured.

While measuring the stainless steel chain, the stainless steel chain factory should also pay attention to observe whether there is any deformation of the chain, or cracks, rust and other problems.In addition, accessories such as pins, rollers, and joints should also be kept normal and free of defects.

Next, the stainless steel chain factory also needs to check whether the chain makes other noises during operation, or whether it exhibits abnormal vibration conditions. If some, it indicates that the chain has certain problems.The stainless steel chain factory also reminds everyone that it is necessary to ensure that the chain has good lubrication.

For the clearance on the chain, it is necessary to apply a certain pull to the chain and create a certain tension to stop the measurement, so as to ensure that the measurement error is less; at the same time, the measurement should be stopped at a suitable position according to the actual situation.