The chain is an important component of the chain conveyor. Because the types of conveyors are different, the devices used to drive the operation of the conveyor chain are also different.When designing, we must fully grasp the difference between it and the transmission chain, so that the effect of the transmission chain can be fully exerted.

   Because the speed of the drive motor in the conveyor is much higher than the speed of the conveyor chain, the chain conveyor must have a speed reduction mechanism, so when the operating speed of the mechanical speed-regulating conveyor chain needs to be changed within a certain range, it will not It can be achieved by motor speed regulation alone.

   To design a chain conveyor correctly, you must pay attention to the difference between the conveyor chain and the drive chain. Although the two may be very similar in structure or even the same, the functions of the two are obviously different and cannot be generalized.

   The conveyor chain needs to have the function of carrying objects and running on the track. Therefore, it is necessary to further correctly analyze the force of the conveyor chain and its force flow distribution, which plays a key role in the rationality of its design.

   In order to keep the conveyor chain in a certain tensioned state, there must be a corresponding tensioning device to eliminate the phenomenon of bounce, vibration and abnormal noise when the chain conveyor is running due to the slack of the chain.When the conveyor chain is stretched due to wear, it can be compensated by the tensioning device to maintain the pre-tightness of the chain.

   From this point of view, the tensioning device is also one of the indispensable conditions for the normal operation of the conveyor chain. Without it, the chain is likely to have a series of failures, which directly affects the working state of the entire chain conveyor.