The chain is one of the most common transmission parts, and it is also an indispensable part in many industries. Here are two chains that are more popular with users. They are the curved plate chain and the ball chain.And since they are all used as transmission parts, more attention should be paid to the parameters of the chain.

    The curved plate chain can be divided into two series of products of European standard and American standard, but no matter which standard it is, this kind of chain is more suitable for use in turning conveyors such as bottling, packaging, canning, etc.As the gap between the pin shaft and the sleeve of the bent plate chain increases, the chain can turn sideways.

    The ball chain is connected in series with the outer chain plate, inner chain plate, shaft sleeve, inner chain plate, outer chain plate and other components on the pin, and the ball is sleeved on the shaft sleeve to form a single-row chain. The chain of this structure It is especially suitable for chain transmission devices on agricultural and industrial transmission and other mechanical equipment.

    The parameters of the chain mentioned above are one aspect that must be paid attention to as a transmission component. In general, the selection conditions for the low-speed operation of the chain should be based on the speed of operation below 50m/min, and the fatigue resistance is better than the wear resistance. Damage is more important.

    The contact with the sprocket like a ball chain is a multi-angle type of contact, which easily leads to a change in speed; in addition, the more sprocket teeth, the smaller the speed change, and vice versa.But there are also tests that prove that the speed of the chain is relatively stable when there are more than 25 outer sprocket teeth.