The Taper Install Direct Thread Adaptor offers a immediate thread interface for taper mounted suppressors. Two models of wrench flats generate it equally easy to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools required. Available in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is comfortable to have immediate thread suppressor capability that may move from sponsor to host with no need for additional muzzle equipment, it is vital to remember that each host firearm must be Taper Adapter checked for baffle alignment via visible inspection before firing.
The 1/2×28 Insert can be used with cartriges up to 30 caliber and the 5/8×24 can be utilized up to .338 caliber.
The use of direct thread adaptors increases on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Attach Suppressor to Rule ALL OF THEM.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for every contingency
Taper Install Repeatability and Stability
Multi-Thread versatility for your Taper Mount Suppressor
taper adapters allow the application of holders or 
equipment with a different machine-side taper then the machine spindle taper, such as by using a BT40 tapping chuck on a 50-taper spindle.
These adapters remove lead period losses in case of a machine breakdown. Adapters may also assist in testing custom equipment on another machine than the planned production machine.
Taper adapters avoid the need for a supply of new holders or tools for a specific machine. They arrive ready to work with with built-in locked clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking product for taper clamping.
The steep taper may be the standardised form of a tool taper for clamping tools in the main spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (on the other hand with the Morse taper), thereby making tool adjustments easier without clamping. This is especially significant for programmed tool changes
Small clamping travel equals short clamping time
High torsional rigidity as a result of short distance between your cutting edge and spindle bearing (brief overall length)
For adapting morse taper equipment to milling devices that take R8 tools
Alloy metal hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper lowering sleeve is used to convert your headstock out of #2 MT to #1 MT. This is useful for those who have a drive centre or pen mandrel which is definitely 1MT as well as your headstock is 2MT