rotary cutter gearbox
rotary cutter gearbox
RC-twenty Series
Specs
Torque: one,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: 1:2.5, one:2.eighty three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: sixteen oz. (.47 L)
Weight: 34 lbs. (fifteen.4 kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Series
RC-30 Series
Specifications
Torque: two,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:one.forty seven, 1:one.71, one:1.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Weight: fifty one lbs. (23.1 kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Sequence
Requirements
Torque: two,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.forty seven, one:one.71, one:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Bodyweight: fifty six lbs. (25.four kg)
Programs
Rotary Cutters Rotary Slashers
Gears: Accessible with both straight bevel or spiral bevel gearing.
Energy: Hp & Torque primarily based on AGMA formula for ongoing duty additionally a service or load course aspect.
Shafting: Numerous dimensional, metallurgical, and heat-treat alternatives accessible.
Bearings: Geardrives offered with different bearing lifestyle options.
Lubrication: Drives obtainable with numerous lubes based on running qualities
Substitute Rotary Cutter gearbox, 40hp rated, one-three/8″-6 spline input shaft, one.57″ X 12 tapered spline output shaft and one:1.47 velocity up ratio. These gearboxes have a square housing configuration and are similar in mounting and ratio to the spherical configuration gearboxes. These are unique tools gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which featured slip clutch PTO shafts. This gearbox will not match the IM400, IM500 and IM60 models as they have a easy input shaft! If your gearbox has a twelve spline output shaft and a one-three/eight” – 6 spline input shaft this 
gearbox will work. Bolt sample is four-three/four” on heart gap to gap and 6-3/four” middle to center of bolt gap on diagonal. The mounting holes form a square bolt sample.
rotary cutter gearbox
Need to know regarding rotary cutter gearbox? Please check out the website.