Gear Containers For Rotary Cutter’s, Shredders, and Choppers
RC 30 Sequence Gearbox, 40hp Rated, one-three/eight” SB enter, 1-one/2″ X 12 Spline Output. one:one.47 Ratio Substitute your damaged rotary cutter gearbox with this replacement unit. Why rebuild when you can substitute at these kinds of a minimal cost? These gearboxes have been utilised by Worksaver, HawkLine, Worldwide, WAC, Large Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and a lot of a lot more. Observe: True Gearbox could have a rounded housing or square as demonstrated, relying on recent availability, all internal parts are interchangeable and requirements for equally containers are identical! This gearbox features a 1:one.47 Pace Up gear ratio for use on 5′ and bigger diameter rotary cutters. Sector normal 1-3/eight” easy diameter input shaft with one/2″ shear bolt hole and retaining ring groove and 1.57″ diameter 12 tapered spline output shaft permit fitment to most gentle, common and medium responsibility rotary cutters. Each and every gearbox characteristics substantial speed ball bearing units and heat treated gears and shafts to make certain prolonged existence. Four bolt mounting matches industry standards. Every gearbox includes blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and need sixteen ounces of 80-90W gearlube or equal. Disclaimer: Any and all Unique Gear Manufacturer’s (OEM) tradenames, emblems, drawings, shades, descriptive information and element numbers are employed for areas identification functions only, and DN Products, LLC (DN) is in no way implying that any specific parts are OEM components. Further, any use of the OEM’s tradenames, emblems, drawings or component figures by DN is created only to help DN’s consumers, in obtaining the correct DN component or part which will substitute the OEM’s part.
rotary cutter gearbox