Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless is the most corrosion resistant.
Designs C, D, and J have a bracket on underneath for tying off a single end of a rope.
Style K reduce the force needed to keep your load in place. Unlike standard pulleys, these have a V-groove for more grip on your rope, plus they ratchet when under load so they won’t slip in the additional direction. Pulley for3/8″ dia. rope can be established to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Aluminium and nylon are lightweight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys metric gear rack china without a bearing.
Acetal and aluminum are lightweight and corrosion resistant. Galvanized steel is usually more corrosion resistant than iron and metal. Stainless steel is the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Aluminum is more light-weight than stainless steel. Stainless steel is more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a flat surface to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Stainless steel can be more corrosion resistant than steel.
Hanging Pulleys for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the power of a single-groove pulley to go the same load. They possess a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum is definitely corrosion resistant. Stainless may be the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys possess a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never make use of to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as for example block and tackle systems.They can reduce the force had a need to move the load by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or products over people.
Hanging Pulleys meant for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Style E pulleys have bracket on the bottom that lets you tie off a single end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a free rope end isn’t needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about 50 % the push of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or products over people
Hanging Pulleys designed for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as for example block and tackle systems. They can reduce the force had a need to move the strain by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Style A pulleys possess a bracket on underneath for tying off a single end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also called snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a totally free rope end isn’t needed.
Warning: Never make use of to lift people or items over people.