Our direct supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the proper time at the proper price.
Taper bushing are trusted together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered materials with great tolerance. The feature is definitely easy to make use of and needs no extra alteration. These bushings can fit almost all sorts of assemblies and sizes. They will be the best choice in design for mechanical connections.
No costly re-boring: complete selection of both metric and imperial offered.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range available, for compact lightweight assemblies & Clean, Compact Design.
Ease of installation and removal.

Our immediate supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the proper time at the proper price.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed with high quality engineered materials with great tolerance. The feature is definitely easy to use and needs no extra alteration. These bushings can fit almost all kinds of assemblies and sizes. They will be the best choice in design for mechanical connections.
No costly re-boring: complete range of both metric and imperial obtainable.
Standard range matches up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range available, for compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.
The initial sheave and pulley installation system developed to facilitate installation and replacement of components.
The QD (Quick Detachable) design provides for both conventional (flange outboard) and invert (flange inboard) installation configurations.
1. Be sure the tapered cone areas of the bushing and the within of the driven item are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end initial. Assemble key.
3. Placement QD bushing on shaft. Tighten set screw over key “hands tight” with regular Allen wrench only. Usually do not use excessive force.
4. Slide huge end of sheave or sprocket taper bore into placement over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Notice: Install M thru S bushings in the hub to ensure that the two extra holes in the hub can be found as far as feasible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque table on back. Usually do not use extensions on wrench handles. There should be a gap between your face of the sheave or sprocket hub and the flange of the QD bushing to insure a reasonable cone hold and press fit.
CAUTION: THIS GAP MUST NOT BE CLOSED.
Make use of a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power tranny applications. Flanged quick-disconnect bushings include a completely split style to greatly help provide easy installation and disassembly. A tapered bushing with directly edges uses an internal screw to help drive the bushing into the shaft, while a split taper has a flange and a key on the bushing to greatly help provide more drive.
QD bushings (inch and metric sizes) have a flanged design and show a 4° taper with standard or reverse mounting. They are stocked in popular completed bore sizes and minimum plain bore for custom reboring.
Many people refer to both types as a “taper lock” because they both use the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, runs on the set screw to operate a vehicle the bushing in to the bore of the component getting installed (sheave, sprocket, etc.). Be cautious when setting up these screws. The holes with threads on the bushing are for removal just. Also be aware that the looks of a flange externally of the bushing doesn’t indicate it’s a QD design. Split Taper bushing also offers a flange, and both are not interchangeable. The QD design has a split that continues through the flange. The Metal QD (Quick Disconnect) Type bushing offers versatile and easy installation while providing exceptional keeping power. QD Bushings are utilized thought out the industry offering convenience and design versatility. They are precision machined of quality Metal and are set up by tightening a number of cap screws. This draws the bushing into the taper bore of the product which compresses the bore of the bushing. QD bushings are easily removed utilizing the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting installation of product in the traditional or invert positions. This allows cap screws to end up being installed through item hub or bushing flange whichever is certainly most convenient. A significant benefit in installation, cap screws are often inserted from the outside where they are easily accessible. QD Bushings are available from stock with all popular bores within the number of each size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping push is necessary over standard bored-to-size bushings. Quick-Disconnect Bushings are crucial for mounting v-belt drives, synchronous belt drives and roller chain drives.