This standard selection of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo engine technology, providing limited integration of the electric motor to the machine. Angular backlash of significantly less than 1 arc-a few minutes is provided standard.

They are available in four sizes (50 mm to 100 mm center range) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of motor couplings and mounting flanges are available for assembly to practically all servo motors, and the hollow bore output can be used to mount result shafts, pinion shafts, or other drive elements.

Common applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and digital line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and reduce the expenditure for valuable set up space.

The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you exceptional attenuation properties for the operation of your systems with low levels of vibration. This is definitely due to the longitudinal software of pressure on the input shaft. This allows torque impulses to end up being prevented effectively and for optimum results in terms of running smoothness and noise reduction to be performed.

Both the gear unit, and the synchronous servomotor derive from our modular system. This allows you to have completely individual configuration options for each application. One factor is certain – Our servo gearmotors are real specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, velocity reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the type of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually made from bronze and the worms are metal or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A main benefit of worm equipment reducers is definitely that they generate an output that’s 90° from the insight and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox low backlash worm drive provides right hand threads; to improve the direction of the output, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability could be limited to the main point where it requires gearing. As servo manufacturers develop more powerful motors that can muscle tissue applications through more difficult moves and create higher torques and speeds, these motors need gearheads add up to the task.