Single and dual reduction planetary equipment drives to be utilized with Plastic Gear Rack electric, hydraulic, atmosphere motors or mechanical power insight from high speed, low torque sources to provide decreased speeds at increased torques. The input part has standard SAE pads for motor mounting. Available in the three output configurations proven below. Many units can be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 
5000 RPM. Units with essential parking input swiftness is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power transmission efficiency.
Wheel Drive
Input side has standard SAE pads and splined insight. Output part has hub for mounting automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature can be standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth due to wear. The exterior bearing nut provides the best in shaft retention and shaft power. Output could be a spindle shaft or different sizes of integral pinion gears.