Agricultural Gearbox
The agricultural gearbox for agricultural machinery gearbox is the primary mechanical element of the kinematic chain of agricultural machines. It really is normally driven by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, furthermore to chain gears.
Agricultural gearboxes always have a single input shaft and at least one particular output shaft. If these shafts sit at 90° to each other, the gearbox can be an ORTHOGONAL ANGLE gearbox or more generally called a right-position gearbox.

rotary tiller gearbox can be adopted middle equipment transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally covered after tillage as the operating width is much wider. The quality is dependable and the overall performance is well. So that it can be utilized on dried out and paddy field. It could reduce the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the insight shaft, gets the fewer number of teeth (pinion), therefore the output shaft rotates slower compared to the input shaft.
It is called an increaser when the insight shaft is mounted on the apparatus with the larger number of teeth (crown), therefore the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it really is called a distributor when there are at least two output shafts.
It is called a rotational reverse gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the primary couple of gears and relevant shafts, the gearboxes could also have various other gears with a different number of teeth. The apparatus shift of the main pair of gears with the secondary ones allows different speeds. The manual change of the secondary equipment pair with gears with different number of teeth allows modifications to the result rotation speed.
CMR GROUP can design and manufacture also agricultural machinery applications.