Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for example on camera focus bands. They also offer an economical solution where a sizable gear is necessary or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing can be applied only within the tooth area. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Temperature treated ground gears with high precision and power has excellent cost-performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack manufactured from Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and quantity of the teeth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and number of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of tooth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where metallic racks do no possess this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Instruction Rails (ARL) : Instruction Rails for Molder Flexible Racks.
We offer as standard a wide range of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres in length. STAINLESS and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials can be found on ask for. Moulded Hostaform Racks can be found to offer a cost-effective alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a flexible rack and gear, a rotational joint actuator called vsaFGR can be proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a combination of a nonlinear elastic element and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with respect to the flexible gear rack is definitely perpendicular to the joint loading pressure, so the power necessary for stiffness regulating is as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical alternative where a sizable gear is required or a longer stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is certainly applied just within the tooth region. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and strength has excellent cost-efficiency ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated simply by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and encounter width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and quantity of the teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and amount of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications because of its flexibility, where metal racks do no possess this attribute. Pinions and add-ons are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Guide Rails (ARL) : Guideline Rails for Molder Flexible Racks.
You can expect as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres in length. STAINLESS and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials are available on request. Moulded Hostaform Racks are available to offer a cost-effective alternative where much less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a flexible rack and equipment, a rotational joint actuator called vsaFGR can be proposed to regulate the joint stiffness. The flexible gear rack can be regarded as a mixture of a nonlinear elastic element and a linear adjusting system, providing benefits of compactness. The joint stiffness can be in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible gear rack is perpendicular to the joint loading drive, so the power required for stiffness regulating is really as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.