Outfitted using the zero leak bidirectional checking sole-noid valves, this power unit is built for the operation of two independent circuits. Which are respectively for the main and subordinate platforms of the double scissors lift. Two cut-off valves are made use of for decreasing the machine manually in situation of energy reduction. If additional independent circuits are demanded for your application please contact us for availability.
Remark: one. Please seek advice from our product sales engineer to the various pump displacement, motor electrical power or tank capability.
2. CSA or UL licensed motors can be found upon request.
one. The AC motor is of S3 duty cycle, which can only do the job intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic elements concerned just before installation of the electrical power unit.
3. Viscosity with the oil shoud be 15~46 cst,as well as oil must be clean and no cost of impurities,N46 hydraulic oil is recommended.
four. The power unit ought to be mounted vertically.
five. Check the oil level while in the tank right after the preliminary operating of your power unit.
six. Oil altering is needed after the original one hundred operation hrs,afterwards once each and every 3000 hrs.