Drive chainThere are many types, including plate chain and double-speed chain.Fatigue and ineffectiveness is a difficult problem for plate chains, but for two-speed chains, proper application is essential.Grasping this kind of professional knowledge is beneficial to increase the service life of the transmission chain.

Because industrial equipment usually needs 24 hours of continuous operation, the transmission chain isDrive chainThe key components of the transmission chain must have higher requirements, because if the fatigue value is used, the transmission chain will quickly become invalid and ineffective.

If the transmission chain is overweight during the whole operation, it will split or be easy to shrink.However, the supporting force on the loose side of the drive chain is different from that on the loose side, so the working attitude of the drive chain is to alternately change the tensile stress.After a certain ground stress cycle system, because the fatigue limit is not enough, the transmission chain will be destroyed.

OnDrive chainIn the invalid condition, the problem of surface nitriding can only be dealt with by resisting the stress according to the strengthening method.

Two-speed transmission chains are generally only used for two-speed chain conveyors.According to its instantaneous speed culprit, the support column can move quickly beyond a certain position.In all normal applications of machinery and equipment, because everything is normal or accidental damage occurs, there will be various abnormalities in the two-speed chain. At this time, it must be stopped immediately and repaired immediately to prevent major safety accidents.

However, if it is not for the technical professional maintenance staff or the technical professional maintenance staff without approval, the two-speed chain cannot be repaired; in addition, the power must be cut off before the maintenance, and the power operation cannot be used.