Worm Gear Acceleration Reducers: Double Reduction
Ever-Power. manufacturers double reduction Worm Gear reducers that are built to last. Double reduction units are made with the same high quality elements as the single reduction Worm Gear reducers.
Double Reduction Worm Gear Velocity Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or sound shaft input
Combination of two single reduction reducers
Solid or hollow productivity shafts available
Several styles of bolt-on bases available
Excessive tensile strength cast bronze worm wheel and a hardened and ground alloy steel worm made integral with the shaft for extended and trouble-free life
All cast iron construction
9 Versions: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Reduction Worm Gear Swiftness Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day delivery on stock goods at no additional
cost
Twice reduction gearing mechanism is employed in big machinery and automotives where in the speed must be decreased at a needed level. For eg if the suggestions speed is definitely 2000rpm and the output swiftness desired is normally 300rpm a reduction gearing device is used for instance a reduction gear box. Yet, in case of dual reduction mechanism, the reduction of speed occurs in 2 steps. Primarily the input from the engine shaft includes a pinion mounted onto it through couplings. This pinion gear is then connected to an intermediate equipment which is first lowering gear. This equipment is then connected to another low quickness pinion on another shaft. This low rate pinion is connected to the next reduction equipment which is attached on the propeller shaft which may be the output.
Greaves Double Reduction Swiftness Reducers are two stage worm reduction products. A exclusively designed primary worm lowering unit is integrally mounted on a standard single decrease Greaves worm reducer which varieties the second stage. The composite models provide the most compact and rigid arrangement for large reduced amount of speed necessary for slow shifting machinery. A wide range of ratios upto 4900:1 is available.
The wormshafts are made from top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze double reduction gear reducer centrifugally cast rims of considerable sections welded to rigid centres. Considerable versatility of shaft layout is normally permissible with all types of Double Reduction units
Ever-Power Double Decrease Worm Gearboxes will be two stage worm reduction units.
A specially designed primary worm reduction unit is integrally mounted on a standard single reduction AGNEE worm gearbox which forms the next stage. The composite systems provide the most small and rigid set up for large reduced amount of speed necessary for gradual moving machinery. A wide range of ratios up to 4900:1 is available.
Double Reduction Worm Gear Container Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly used ratios from the overall range of Ever-Power Dual Reduction Worm Gear Box. Details of other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Variation / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are made from top quality case hardening steel, accurately generated, ground and super finished. The worm tires comprise of phosphor bronze centrifugally cast rims of considerable sections welded to rigid centers. Considerable overall flexibility of shaft layout is usually permissible with all sorts of Double Reduction units.
Product Description
The merchandise are widely applied in the producing equipments of all sorts of industries domestic and overseas. They are the best choices for nowadays modern features of mechanical reducing drive control to recognize large twisting distance, large gear ratio, low sound, high performance and low temperature.
Description:
Customized top quality double worm gear swiftness reducer aluminium gearbox reduction gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or since customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Substantial Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral