Any injury within the teeth surfaces of the sprocket diminishes the daily life in the conveyor chain.
With traditional sprockets, substantially worn sprocket teeth have been repaired by teeth padding or the complete sprocket was replaced. In either case, fix was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for the dramatic financial savings in value and time.
Construction
The teeth is often replaced by two approaches: personal tooth substitute or sectional teeth replacement.
The bolts and nuts applied for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated over the correct.
The 
over photograph as well as major right illustration present a sprocket for person tooth replacement. Since the joint encounter concerning the replaced teeth and also the sprocket is formed inside a distinctive arc, the bonding accuracy is substantial plus the sprocket power is enhanced. Additionally, because the load acting within the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket building is patented.
You can find two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for substantial sprockets obtaining heavy loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags