Why Coupling Grease?
Satisfactory lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is exclusively built for gear coupling applications to improve coupling existence although drastically minimizing maintenance time. Its higher viscosity base oil and tackifier mix to keep the grease in spot and stop separation and it really is in finish compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in colour and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces usually located in couplings. Bearing or general objective greases have a tendency to separate and drop effectiveness as a result of large centrifugal forces on the numerous components at large rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil from the thickeners. Heavy thickeners, which have no lubrication attributes, accumulate in the gear tooth mesh location resulting in premature coupling failure. Gear Coupling Grease is designed to remarkably resistant to centrifugal separation of your oil and thickener, which will allow the lubricant to get made use of for any reasonably extended period of time.
One of several tricks to your results of Gear Coupling Grease is definitely the variable consistency through the entire operating cycle on the application. The consistency of our gear coupling grease adjustments with the working ailments. Working with the lubricant underneath actual service ailments brings about the grease to develop into semi-fluid, functionally solash lubricating the put on surfaces of your coupling. Because the grease cools, it returns towards the unique consistency, therefore avoiding leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust safety
High load carrying capabilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in area below higher speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?