We – EPG Team the largest Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Good quality and credit are the bases that make a corporation alive. a specialised supplier of a total variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….help The new merchandise consist of a series of substantial-tech and large top quality chains and sprockets and gears, these kinds of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator action-chains, high-velocity tooth chains, timing chains, self-lubrication chains, between which have sort substantial pace tooth chain for automobile department dynamic box and aerial chains fill in the blanks of chain in China. necessary. Common strands have an even variety of pitches, pin hyperlinks, and roller back links. A roller chain strand can be shortened by taking away hyperlinks and lengthened by introducing total or a half hyperlinks (offset backlinks).
INTRODUCTION
Offset Link Chain for Sugar Sector
The offset website link chain is developed with substantial abrasion, impact, and corrosion resistance to satisfy the software demands in sugar creating sector. Its aspect plates are bended but with paralleled ends. Both sizzling bending and cold bending strategies can be utilized for aspect plate processing. The adoption of sophisticated bending die, coupled with increased top quality inspection, tends to make certain the bending of facet plates will come with out cracks. Consequently, the offset sidebar chain will not crack effortlessly under weighty load situations.
Produced using stainless steel and alloy metal materials, our offset hyperlink chain for sugar sector gives bare minimum tensile power choices among 250 and 900KN, and rated working load alternatives from18 to 85KN.
DC 2184 DC 8184 DC C2614 DC 09063 all avaliable
| Chain No. | Pitch P (mm) | Inner width of slender stop b1 (min.) (mm) | Outer diameter of roller (bushing) D (max.) (mm) | Pin | Sidebar | Min. tensile toughness Q (min) (KN) | Rated operating load (KN) | Weight for each meter q (kg/m) | |||
| d (mm) | L1 (mm) | L2 (mm) | h (mm) | T (mm) | |||||||
| *#SS100D | 100 | 33.27 | 33.27 | seventeen.27 | 38.4 | forty eight.six | forty four.five | 8 | two hundred | seventeen.eight | 10.forty seven |
| DC 1125 | one hundred and one.6 | 32.six | fifty.eight | 17.five | 37.9 | 45 | fifty.eight | 7.9 | 210 | eighteen.26 | |
| *DC D2184 | 152.4 | 34.nine | 76.2 | 22.23 | forty three.9 | fifty one.two | 50.8 | 9.five | 355.six | 31.6 | 17.7 |
| DC W1796 | 152.4 | 37.eight | 69.eighty five | 22.23 | 44.two | fifty two.9 | fifty seven.2 | nine.5 | 444.5 | 31.six | 18.fifty nine |
| DC 09063 | 152.4 | 38 | 76.two | 23.eighty three | 47.one | fifty four.9 | 60.3 | 10.three | 622.three | 36.one | 21.eighty three |
| DC 8184 | 203.two | 45.nine | 88.9 | 25.four | fifty nine.7 | 65.8 | 69.9 | twelve.seven | 742.4 | 47.six | 29.two |
| DC C2614 | 304.eight | sixty nine.eighty five | 63.5 | 31.seventy five | 78.5 | 84.5 | 88.9 | fifteen.nine | one thousand | eighty four.five | 33.68 |
Solution SHOW
The use of authentic equipment manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the outlined substitution areas contained herein are not sponsored, accepted, or produced by the OEM.
