Cell loading platform

The loading and unloading system is a very popular transportation way in the present day logistics. It is a bridge connecting the business logistics chain, and also a loading and unloading procedure system for enterprises to rapidly and securely transportation the goods and goods. The height of the system can not be adjusted, but the peak of the carriages is different. There is always a certain height difference or gap in between the transportation vehicle and the loading and unloading platform, which brings about the forklift to be unable to enter and exit the transportation car to directly load and unload the items.
The little mobile loading and unloading platform can provide a reputable relationship with the truck, so that the forklift can properly and speedily enter and exit the transport car for loading and unloading doing work. The product has the functions of hassle-free unloading, strong security and reduced routine maintenance expense, which is appropriate for different autos on loading and unloading internet sites andplaces with comparatively weighty traffic.
  

Steps:
one. Shift the cell loading and unloading platform to the side of the motor vehicle or platform that wants to load and unload items, and make the facet with the assistance roller close to the vehicle or system.
2. Modify the support roller of the loading and unloading system and allow its top marginally decrease than the height of the motor vehicle or platform.
three. Rotate the assistance outrigger to make it support the products, and stop the tools from relocating by by itself. If the assistance outrigger is not supported well, the equipment is strictly prohibited.
four. Use the aviation plug geared up with the products to connect the electricity line. For your security, remember to guarantee that the products is reliably grounded.
(If 380V, we suggest that you use national regular copper wire in excess of 1.5 square meters, if 220V, you would far better use national regular copper wire above 1.five square meters.)
five. Up and down buttons on the distribution box can handle the ascending and descending motions of the desk, or use the equipped distant manage to do the same procedure.

6.When the tools powers off or malfunction occurs, the products can be decreased to the cheapest position via the guide descent button on the facet of the pump station to guarantee security.

Observe:
The 380V solution may possibly reverse the motor owing to phase sequence, result the gear are unable to increase up.Then we need to alter the stage sequence.

Notes:
one.When employing the unit, join the power cable correctly to avert electrical components from burning out.
two. The assist bar need to be decreased when the equipment is operating.
three.  The load capacity ought to not exceed the rated load, and the load ought to be evenly dispersed on the platform area. Do bear in mind CZPT partial load.
4.  The operator need to know the overall performance and the procedure process of the products.
five.  The temperature of doing work environment is from- ten ° to 50 °.  32# hydraulic oil is used in winter and forty six# hydraulic oil is used in summer. The oil must be replaced if the equipment is utilised for much more than a thousand several hours or 12 months.
six. Before employing, remember to bear in mind to check out regardless of whether all the fixed elements are agency or not, whether or not the pipe relationship is dependable, regardless of whether the pipe is broken. To make sure that the electrical parts are working usually, the lubrication oil is sufficient in the guide way.
7. The platform ought to be lowered to the lowest place when completed making use of.
8. The tools has no water-proof operate. Do not get moist in the rain when storing outdoors.