Toothed belt pulleys
We always look for a solution
We produce toothed belt pulleys how you require.
Features:
· Unprocessed, preprocessed or completely processed
· Optionally available with appropriate clamping component (Taper Lock System)
· Very wide variety of tooth styles (T, In, HTD,…) and pitches (imperial, 3M, 5M, 8M,…) available
· Low backlash toothing available
Use of standard surface material

Consisting of 2 pieces Printed timing belt wheels profile HTD-3M for 9mm wide timing belts.

Allowing you to connect the encoder to the main spindle. Almost any inside diameter is possible.Afterwards the encoder is linked 1:1 to the spindle by the same outer diameter. Additionally it is possible to print additional ratios if the area conditions make this necessary. In this case you can modify the encoder so that the pulse rate fits again afterwards.

Up to 150mm outside diameter are feasible, the inside diameter can be manufactured according to your wants. The within diameters are grated or turned out, so they are later on precisely made to measure.

Material: PETG, printed with an Ultimaker 2+

attachment:

Clamping match 3x M3 grub screws (arranged at an angle of 120°, pressed-in M3 nuts serve as thread)
or keyway (please specify desired dimension)
Important: Please indicate the approximate shaft dimension spindle shaft – encoder shaft, along with the desired shaft diameter spindle shaft and encoder shaft. These details could be entered by e-mail or in the comment field at the end of the order..
Factory Direct Raw-Edge Toothed V-Belts for Tractors, Harvesters
Product Details

Type and Size of Classical V Belt

V-belt Type
 
Top
Width
Pitch
Width
Height Length Length Range Length
Range
Reinforcement Angle
Conversion (inch) (mm) Body 40°
O 10 8.5 6 lw=Li+25 15"-99" 380-2514 7*4N*3 40°
A 13 11 8 lw=Li+33 19"-163" 480-4139 7*4N*3 40°
B 17 14 11 lw=Li+43 25"-360" 630-9159 8*5N*3 40°
C 22 19 14 lw=Li+62 49"-479" 1256-12160 9*9N*3 40°

Type and Size of V Ribbed Belt/Poly V Belt
 

Type Rib Section Angle of Rib Belt Width Belt  Thickness Rib Number Length Range
3PK 3.56 40 10 4.8 3 500-5000mm
4PK 3.56 40 13.6 4.8 4 500-5000mm
5PK 3.56 40 17 4.8 5 500-5000mm
6PK 3.56 40 20.7 4.8 6 500-5000mm
7PK 3.56 40 24.3 4.8 7 500-5000mm
8PK 3.56 40 27.8 4.8 8 500-5000mm
9PK 3.56 40 31.4 4.8 9 500-5000mm
10PK 3.56 40 35 4.8 10 500-5000mm
12PK 3.56 40 42.5 4.8 12 500-5000mm
15PK 3.56 40 53 4.8 15 500-5000mm

Structure of V Belt
 

  Function Material
Tension
Member
The treated polyester cord is a low stretch high
strength tension member able to withstand shock
loads on drives with fixed centers
Polyester/Aramid Fiber
Rubber
Ribs
Long wearing, oil resistant, fibre-loaded neoprene
rubber is used in the ribs to provide support for the
tension member and to transmit the loads to the pulley
NR,CR,EPDM
Backing
Material
Bias ply type fabric backing resists cracking and
provides abrasion resistance
NR,CR,EPDM
Insulation
Material
oil and heat resistant rubber is used to bond the
tension member to the rest of the belt
NR,CR,EPDM

Related Products

Work Place

 
Raw-Edge Toothed V-Belts for Harvesters, Buses and Trucks
Product Details

Type and Size of Classical V Belt

V-belt Type
 
Top
Width
Pitch
Width
Height Length Length Range Length
Range
Reinforcement Angle
Conversion (inch) (mm) Body 40°
O 10 8.5 6 lw=Li+25 15"-99" 380-2514 7*4N*3 40°
A 13 11 8 lw=Li+33 19"-163" 480-4139 7*4N*3 40°
B 17 14 11 lw=Li+43 25"-360" 630-9159 8*5N*3 40°
C 22 19 14 lw=Li+62 49"-479" 1256-12160 9*9N*3 40°

Type and Size of V Ribbed Belt/Poly V Belt
 

Type Rib Section Angle of Rib Belt Width Belt  Thickness Rib Number Length Range
3PK 3.56 40 10 4.8 3 500-5000mm
4PK 3.56 40 13.6 4.8 4 500-5000mm
5PK 3.56 40 17 4.8 5 500-5000mm
6PK 3.56 40 20.7 4.8 6 500-5000mm
7PK 3.56 40 24.3 4.8 7 500-5000mm
8PK 3.56 40 27.8 4.8 8 500-5000mm
9PK 3.56 40 31.4 4.8 9 500-5000mm
10PK 3.56 40 35 4.8 10 500-5000mm
12PK 3.56 40 42.5 4.8 12 500-5000mm
15PK 3.56 40 53 4.8 15 500-5000mm

Structure of V Belt
 

  Function Material
Tension
Member
The treated polyester cord is a low stretch high
strength tension member able to withstand shock
loads on drives with fixed centers
Polyester/Aramid Fiber
Rubber
Ribs
Long wearing, oil resistant, fibre-loaded neoprene
rubber is used in the ribs to provide support for the
tension member and to transmit the loads to the pulley
NR,CR,EPDM
Backing
Material
Bias ply type fabric backing resists cracking and
provides abrasion resistance
NR,CR,EPDM
Insulation
Material
oil and heat resistant rubber is used to bond the
tension member to the rest of the belt
NR,CR,EPDM


With high quality and competitive price
Prompt delivery
Packing as per customer’s demand.
We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.
Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.