Ever-power Taper-Lock pulleys are flangeless for clean, compact application. They are manufactured with an 8° taper and a flush-installed design without protruding parts providing protected locking and elimination of wobble. In addition, Dodge Taper-Lock® bushings can be found with an optional Gemstone D® integral type in well-known sizes for a more precise fit.
Product Features
Stock sizes available up to 12” shaft diameter
Globally acceptance and availability inch and metric bores
Flush Mounting-No Protruding Parts
Easy On/Easy Off design
Materials obtainable in sintered metal, cast iron, ductile iron, steel and stainless
modifications & accessories
Re-borable bushings available for special bores or key seats, spline broaching.
Common Applications
Aggregate & Cement
Air Handling
Chemical, Oil, & Gas
Food, Beverage, & Pharmaceutical
Paper & Forest
Unit & Baggage Handling
Water & Wastewater
common applications
Any application that will require mounting of something on a shaft
Bushings are essential elements to attach Dodge mechanical drive parts:
V-belt drives
synchronous drives
roller chain drives

Notes:
Fits SPA section V Belt
The Taper-Lock pulley size is defiined by 4 digits representing two numbers. The initial two digits represent the maximum bore size and the next two digits represent the bushing duration. For example, product number 1008 has a max bore of 1 1.0″ and a complete length of 0.8″
” bore sizes are specified with the whole inch accompanied by the fraction. For example a 1.5″ diameter bore would be 1-1/2. Metric bore sizes are specified with “MM” after the metric dimension (X 25MM). These bushings are easy to install and remove, these bushings match flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings possess an 8° taper, are made of steel and have a black oxide coating.

Specs :
Pitch Diameter: 75mm
Outside Diameter: 80.5mm
No of Rows: 2
Bush Size: 1108
Maximum Bore Size: 28mm / 1.1/8
Material: Cast Iron