Hanging Pulleys pertaining to Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about half the power of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Acetal, nylon, and aluminum are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Designs C, D, and J have a bracket on the bottom for tying off 1 end of a rope.
Style K reduce the force needed to hold your load set up. Unlike standard pulleys, these have a V-groove for more grasp on your rope, and they ratchet when under load so they won’t slip in the additional direction. Pulley for3/8″ dia. rope can be set to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a set surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Aluminium and nylon are light-weight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Acetal and aluminium are light-weight and corrosion resistant. Galvanized steel is certainly more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end isn’t needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Aluminum is more lightweight than stainless steel. Stainless can be more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a set surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys to get Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about 50 % the push of a single-groove pulley to move the same load. They have got a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is certainly corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open therefore it’s simpler to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or even to guide a rope.
Style D pulleys have a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move a single load, such as for example block and deal with systems.They can reduce the force needed to move the load by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or products over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the power of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Style Electronic pulleys have bracket upon the bottom that lets you tie off a single end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a totally free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the power of a single-groove pulley to go the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to maintain rope secure.
Warning: Never make use of to lift people or products over people
Hanging Pulleys for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as for example block and tackle systems. They can reduce the force needed to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off one end of a rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also called snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never use to lift people or items over people.