The EP Greenhouse gearbox is a concise and lightweight reduction reducer with a limit switch system that’s ideal for assembly of a locally available electric electric motor. The gear driver is used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gearbox is rainproof and windproof. The reducer includes a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is definitely locked when the reduction gear motor is not running. The completely sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the usage of an growth chamber, the gearbox can be installed in any position. There are no restrictions, because there is no need for a bleed connect. The sealed reduction geared motor keeps the gear oil of the gearbox in optimum condition because of its entire operating lifetime. The gearbox is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction gearbox has an FT85 motor assembly flange, on to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an built-in chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit switch system is accessible and easy to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).