Carton Box Die Cutter Rype-SA

 

 
 

  1. FEEDER (Max minimize guide edge feeder)
  1. New up graded, very same as Max minimize direct edge feeder, a lot more exact and optimistic feeding.
  2. Rare jogger at feeder to get ready for the feasible future in line procedure with pre feeder (optional).
  3. Pneumatic facet press guidebook plates (remaining and correct sides).
  4. Remaining and proper facet guides, individually place adjustable and sign-up side at selection for every box format.
  5. Substantial vacuum blower with silencer and valving program.

  1. DIECUTTING Section
  1. Crank and worm gear, toggle push technique for the reduce platen.
  2. The cell platen stroke is elevated from 71mm to 95mm for dealing with corrugated board (specifically AB Flute) smoother.
  3. Stationary large precision upper platen.
  4. Safety doorway and die chaser security locking system.
  5. Substantial torque pneumatic clutch/crack for good clutch on and reliable breaking, and unique air inlet program to handle the air quantity for sleek equipment start off and end.
  6. Air cushion underneath the chopping plate for effortless chopping plate in and out.
  7. Gear major generate.
  8. Overloading defense torque restrict clutch.
  9. State-of-the-art three cam index gripper chain push.
  10. Centre line program suitable to Heart Line II, helps make the cutting die and stripping die centered rapidly.
  11. High good quality precision alloy gripper bars, each with 12 specific hardened grippers to make sure organization seize of the sheet at higher speed.
  12. Sheet arrival and departure verify picture sensor.
  13. Still left and appropriate front lay locking blocks, separating and synchronizing adjustment CZPT.
  14. Chain manual rail use VL compound to enhance abrasive resistance and seismic resistance.
  15. Self-diagnostic problems screen.
  16. Digital speed show.
  17. Automatic recycling lubrication method with oil pressure gauge and oil force swap.
  18. Automated major gripper push chain lubrication.

 

  1. STRIPPING Area
  1. Centerline program (suitable to Centerline II).
  2. 400mm upper stripping frame raiser boosts the operation room, far more operator friendly.
  3. Motorized upper body suspending hoister.
  4. Lead edge waste removal method.
  5. Centerline system for swift stripping die set up.

  1. Supply
  1. Escalator delivery fork with non-cease air cylinder for neat and optimistic delivery and conveyor belt shipping and delivery table to defend the sheets from scratches.
  2. Bundle shipping and delivery with pre-set counter requesting only 1 sheet interval in non-cease procedure at 4500S/H creation velocity.
  3. The bundle shipping and delivery table can be prepared for foreseeable future link with breaker for in line procedure (to be required at purchase).
  4. Full stripping with/CZPT direct edge squander stripping convertible by one button, no tool modify, a lot more operator pleasant and risk-free procedure.
  5. CZPT loaded adjustable chain tension back buffering wheel to keep the chain stress constant and smooth gripper bar motion.

 

No. Model RYPE-1620SA
1 Optimum Sheet Dimension 1620x1200mm
two Minimum Sheet Dimension 650x450mm
three Optimum Reducing Dimensions 1600x1180mm
4 Interior CZPT Size 1630x1210mm
5 Maximum Mechanical Speed 5000 cycles/hour
6 Maximum Slicing Pressure 400 tons
seven Stock Range E, B,C,A and AB flute corrugated board (one~8.5mm)
8 Minimal Gripper Margin six~12mm
9 Minimum Gripper Waste 12mm(Distance from initial knife to paper edge)
ten Cutting Rule Peak 23.8mm
11 Overall Electricity Required 35 KW
twelve Principal Motor Electricity 22 KW
thirteen CZPTal Energy 380V, 50HZ, 3-phase
14 Air Pump Displacement .7m³/min
fifteen Cell Decrease Platen Modifying Selection ±1.5mm
sixteen Internet Bodyweight of Device 32 tons
17 Gross Excess weight of Device 39.5 tons
eighteen Equipment Proportions (LxWxH) 9980×5670 x2480 mm (contains strolling board)

Carton Box Die Cutter Rype-SA